1 / 3
Mach 1 BT20 - Exiter Fin Jig, Elliptical Nose Cone, and Shock Cord Anchor — zdjęcie 1
1 / 3

Mach 1 BT20 - Exiter Fin Jig, Elliptical Nose Cone, and Shock Cord Anchor

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Additional and replacement parts for the Mach1 Rocketry BT20 Exiter fiberglass model rocket kit.

Ocena
0 / 5
Polubienia
3
Pobrania
29
Wydruki
0
Wyświetlenia
180
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution — Share Alike

Additional and replacement parts for the Mach1 Rocketry BT20 Exiter fiberglass model rocket kit. The files include a BT20 3 fin jig specifically designed for the Exiter, a shock cord retainer, and an elliptical nose cone.

The fin jig could work for other BT20 body tubes, but check the height of the standoff relative to the fins and the spacing for the thickness of the fins. The shock cord mount can be epoxied about mid-tube. The elliptical nose cone is an optional replacement nose cone. The Fusion 360 design files are included if you need to make changes and has many of the key values set as parameters.

The rocket model kit is at: Mach 1 Rocketry

Visit MacModeler, my blog discussing a wide variety of eclectic models.

Print Settings

Resolution:

0.1mm

Infill:

20%

Filament brand:

Keene Village Performance

Filament color:

Blue

Filament material:

PLA

Notes:

The resolution setting is not critical for the effectiveness of the design of the fin jig but is recommended for the nose cone.

Keene Village Performance PLA is available at: Keene Village Plastics

Originally uploaded to Thingiverse.com by Macmodeler on February 14, 2019.

Tagi