Mach 1 BT20 - Exiter Fin Jig, Elliptical Nose Cone, and Shock Cord Anchor
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Additional and replacement parts for the Mach1 Rocketry BT20 Exiter fiberglass model rocket kit.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 29
- Makes
- 0
- Views
- 181
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Share Alike
Additional and replacement parts for the Mach1 Rocketry BT20 Exiter fiberglass model rocket kit. The files include a BT20 3 fin jig specifically designed for the Exiter, a shock cord retainer, and an elliptical nose cone.
The fin jig could work for other BT20 body tubes, but check the height of the standoff relative to the fins and the spacing for the thickness of the fins. The shock cord mount can be epoxied about mid-tube. The elliptical nose cone is an optional replacement nose cone. The Fusion 360 design files are included if you need to make changes and has many of the key values set as parameters.
The rocket model kit is at: Mach 1 Rocketry
Visit MacModeler, my blog discussing a wide variety of eclectic models.
Print Settings
Resolution:
0.1mm
Infill:
20%
Filament brand:
Keene Village Performance
Filament color:
Blue
Filament material:
PLA
Notes:
The resolution setting is not critical for the effectiveness of the design of the fin jig but is recommended for the nose cone.
Keene Village Performance PLA is available at: Keene Village Plastics
Originally uploaded to Thingiverse.com by Macmodeler on February 14, 2019.