1 / 1
Baldur's Gate 3 Logo (Filament Painting) - HueForge
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Filament painting made using HueForge - Filament swaps ONLY, no MMU or AMS required.
- Ocena
- 5 / 5
- Polubienia
- 71
- Pobrania
- 324
- Wydruki
- 5
- Wyświetlenia
- 2368
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 5) (Komentarze: 5)Remiksy (1)Kolekcje (102)Powiązane
Baldur's Gate 3 logo filament painting created in HueForge.
Printing instructions:
Filament swaps ONLY, no MMU or AMS required.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
It is best to disable z-hop to eliminate as much stringing as possible.
You can use same filaments as I did or you can experiment with your own.
Don't forget to upload a make!
Filaments Used:
- PLA BambuLab Basic Black Transmission Distance: 0.3
- PLA Gratkit Gray Transmission Distance: 1
- PLA Spectrum Rust Copper Transmission Distance: 2
- PLA BambuLab Basic Jade White Transmission Distance: 6
Swap Instructions:
- Start with Black
- At layer #16 (1.36mm) swap to Gray
- At layer #18 (1.52mm) swap to Jade White
- At layer #21 (1.76mm) swap to Rust Copper
- At layer #34 (2.8mm) swap to Jade White for the rest.
