1 / 1
Baldur's Gate 3 Logo (Filament Painting) - HueForge — image 1

Baldur's Gate 3 Logo (Filament Painting) - HueForge

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Filament painting made using HueForge - Filament swaps ONLY, no MMU or AMS required.

Rating
5 / 5
Likes
71
Downloads
324
Makes
5
Views
2,369
Reviews
3

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Baldur's Gate 3 logo filament painting created in HueForge.

Printing instructions:

Filament swaps ONLY, no MMU or AMS required.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
It is best to disable z-hop to eliminate as much stringing as possible.

You can use same filaments as I did or you can experiment with your own.

Don't forget to upload a make!

Filaments Used:
  • PLA BambuLab Basic Black Transmission Distance: 0.3
  • PLA Gratkit Gray Transmission Distance: 1
  • PLA Spectrum Rust Copper Transmission Distance: 2
  • PLA BambuLab Basic Jade White Transmission Distance: 6
Swap Instructions:
  • Start with Black
  • At layer #16 (1.36mm) swap to Gray
  • At layer #18 (1.52mm) swap to Jade White
  • At layer #21 (1.76mm) swap to Rust Copper
  • At layer #34 (2.8mm) swap to Jade White for the rest.
     

Tags