Automatic Z-Calibration for V-Core 3
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Basic design of the solution for Automatic Z-Calibration prepared for V-Core 3.
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 62
- Wydruki
- 0
- Wyświetlenia
- 637
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
22.10.2023: new shape of the pin. I had some issue with the original pin (nozzle with the rest of the filament on the tip was able to put the pin out) so I made new pin from the carbon rod.
For that design is relevant file Mellow_z_endstop_holder v2.0. Look at the section picture.
***
One of the possible solutions how to deal with the Automatic Z calibration before each print. Published solution contains from the Euclid Servo probe dock and under bed spacer for Mellow Z Endstop.
Attached model are Fusion Assembly files and STEP files as well.
Note: Original Euclid dock is prepared by BRS Engineering and kinematic coming from Voron world (unfortunately, I cannot remember who is original maker of it). I took them and modified little bit. I couldn't set “Remix or variation of another model" without proper link so ignore “I made it” choice.
Links:
- SW implementation: https://github.com/protoloft/klipper_z_calibration#requirements
- Mellow Z Endstop https://www.aliexpress.com/item/1005004822732672.html?spm=a2g0o.order_list.order_list_main.10.3e871802r28Imp
- some MG90S servo motor
Video from action (little old design, but principes are the same):