Sliding Case to suit Keychron K14 (Pro)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A single piece (when assembled) sliding case to fit the Keychron K14 (Pro) mechanical keyboard with SA/MT3 keycaps.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 149
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- GNU General Public License v3.0
I have a Keychron K14 Pro (non-aluminium) with /dev/tty keycaps, which being MT3 profile, are quite tall. I bought the official carrying case (photo), but found it to be woefully oversized and a very inefficient use of space, so I set about making my own.
The result is this, my first serious design attempt in Fusion 360. Key features:
- Fully encloses the keyboard on 3 sides for better protection in a busy backpack.
- It is parametric so might be able to be remixed for other keyboard dimensions.
- Can be cut in-slicer (as I did) to print vertically and maximize strength along this axis. I have included STLs to this effect as a guide.
- Contains internal cutouts for 2mm steel rod (or plastic substitute) for strengthening.
- If you do cut into sub-assemblies, just be sure to use something in the reinforcement holes and use a plastic glue that can take some bending. I used Revell Contacta on my ABS, which seems to hold up quite well to bending.
Things I'd like to make in a second version:
- Standoffs on the inner base so that the switches no not bear the load of the keyboard when it is vertical or slides in (currently remedied with sticky foam instead).
- Longer overall to ensure keyboard is fully within the dimensions of the case.
- More effective finger cutouts for retrieving the keyboard against gravity such as when in a backpack.
I'd be thrilled to see this remixed or as an inspiration for a redesign. I have included my Fusion 360 design file should you wish to do so.