1 / 1
Sliding Case to suit Keychron K14 (Pro) — image 1

Sliding Case to suit Keychron K14 (Pro)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A single piece (when assembled) sliding case to fit the Keychron K14 (Pro) mechanical keyboard with SA/MT3 keycaps.

Rating
0 / 5
Likes
0
Downloads
20
Makes
0
Views
149
Reviews
0

Updated at source:

Model information

Category
Computers
License
GNU General Public License v3.0

I have a Keychron K14 Pro (non-aluminium) with /dev/tty keycaps, which being MT3 profile, are quite tall. I bought the official carrying case (photo), but found it to be woefully oversized and a very inefficient use of space, so I set about making my own.

The result is this, my first serious design attempt in Fusion 360. Key features:

  • Fully encloses the keyboard on 3 sides for better protection in a busy backpack.
  • It is parametric so might be able to be remixed for other keyboard dimensions.
  • Can be cut in-slicer (as I did) to print vertically and maximize strength along this axis. I have included STLs to this effect as a guide.
  • Contains internal cutouts for 2mm steel rod (or plastic substitute) for strengthening.
  • If you do cut into sub-assemblies, just be sure to use something in the reinforcement holes and use a plastic glue that can take some bending. I used Revell Contacta on my ABS, which seems to hold up quite well to bending.

Things I'd like to make in a second version:

  • Standoffs on the inner base so that the switches no not bear the load of the keyboard when it is vertical or slides in (currently remedied with sticky foam instead).
  • Longer overall to ensure keyboard is fully within the dimensions of the case.
  • More effective finger cutouts for retrieving the keyboard against gravity such as when in a backpack.

I'd be thrilled to see this remixed or as an inspiration for a redesign. I have included my Fusion 360 design file should you wish to do so.