Rope Stake / Distance Marker
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stakes to hold down rope in grass. Includes blank stake to write on, as well as 10, 15, 20, 25, and 30 pre-modeled.
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 31
- Wydruki
- 1
- Wyświetlenia
- 354
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution
These small markers are designed to hold a nylon rope in place by pinning it to the grass.
They can also be used to mark distance along the staked rope - stakes are pre-modeled with the numbers 10, 15, 20, 25, and 30. A blank stake is also included (and can be found on OnShape here), and can be modeled to add your own number, or printed blank and written on with a Sharpie.
I made these specifically to hold down and mark distances along a rope I use to practice putting around my disc golf basket. I tie one end of the rope to the pole supporting the basket, and set these stakes every five feet along the rope.
Aside from my intended use, I could see these being useful for holding down a rope while marking out landscaping. Or, scaled up a bit, they could be used to hold an irrigation line in place in your garden, while also giving a place to write on to mark your rows.
I printed mine in white Elegoo PLA on a .6mm nozzle, and they seem to be plenty strong for sticking into the ground.