Rope Stake / Distance Marker
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Stakes to hold down rope in grass. Includes blank stake to write on, as well as 10, 15, 20, 25, and 30 pre-modeled.
- Rating
- 5 / 5
- Likes
- 11
- Downloads
- 31
- Makes
- 1
- Views
- 354
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution
These small markers are designed to hold a nylon rope in place by pinning it to the grass.
They can also be used to mark distance along the staked rope - stakes are pre-modeled with the numbers 10, 15, 20, 25, and 30. A blank stake is also included (and can be found on OnShape here), and can be modeled to add your own number, or printed blank and written on with a Sharpie.
I made these specifically to hold down and mark distances along a rope I use to practice putting around my disc golf basket. I tie one end of the rope to the pole supporting the basket, and set these stakes every five feet along the rope.
Aside from my intended use, I could see these being useful for holding down a rope while marking out landscaping. Or, scaled up a bit, they could be used to hold an irrigation line in place in your garden, while also giving a place to write on to mark your rows.
I printed mine in white Elegoo PLA on a .6mm nozzle, and they seem to be plenty strong for sticking into the ground.