1 / 2
Z lead shaft upper holder for TRONXY XY-3 SE — zdjęcie 1
1 / 2

Z lead shaft upper holder for TRONXY XY-3 SE

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This reduces bending the leadshaft due to the sync belt tension to straighten the leadshaft more than the stock holder.

Ocena
0 / 5
Polubienia
3
Pobrania
30
Wydruki
0
Wyświetlenia
215
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

The Z leadshaft upper holder for TRONXY XY-3 SE series 3D printers.

This has two bearings mounted on a highly stiff body. One is a ball bearing for radial loads, the other is a thrust bearing for axial loads. By these two bearings to prevent bending the Z leadshaft by the sync belt tension to straighten the leadshaft more than the stock upper holder.

And axial loads to the Z stepper motor can be reduced by the thrust bearing.

BOM

PartPCS
608-2RS or 608ZZ ball bearing (press fit to the holder from bottom)2
F8-16 thrust bearing (placed directly on top of the holder)2
M4x106
M4 T-nut6

See also

Z Lead Shaft Alignment Tool for TRONXY XY-3 SE for align the Z leadshaft and stepper.

Simple High-Performance Anti-Z-Wobble Lead Nut for prevents wobble by the leadshaft to printing.

Tagi