Z lead shaft upper holder for TRONXY XY-3 SE
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This reduces bending the leadshaft due to the sync belt tension to straighten the leadshaft more than the stock holder.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 30
- Makes
- 0
- Views
- 215
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The Z leadshaft upper holder for TRONXY XY-3 SE series 3D printers.
This has two bearings mounted on a highly stiff body. One is a ball bearing for radial loads, the other is a thrust bearing for axial loads. By these two bearings to prevent bending the Z leadshaft by the sync belt tension to straighten the leadshaft more than the stock upper holder.
And axial loads to the Z stepper motor can be reduced by the thrust bearing.
BOM
| Part | PCS |
| 608-2RS or 608ZZ ball bearing (press fit to the holder from bottom) | 2 |
| F8-16 thrust bearing (placed directly on top of the holder) | 2 |
| M4x10 | 6 |
| M4 T-nut | 6 |
See also
Z Lead Shaft Alignment Tool for TRONXY XY-3 SE for align the Z leadshaft and stepper.
Simple High-Performance Anti-Z-Wobble Lead Nut for prevents wobble by the leadshaft to printing.