1 / 2
Self centering sugar Rocket
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fully functional sugar rocket.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 42
- Wydruki
- 0
- Wyświetlenia
- 409
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Share Alike
It is intended to be attached with tape to a 6-8mm diameter wood stick.
The advantage of this model is that it has a housing at the tip to add a smooth 8mm steel or aluminum rod in diameter and also includes a cylinder to press the sugar. This is how the finished rocket, with the hole already made perfectly concentric and straight for a stable flight.
It was tested several times.
Parts list
- 3d printed Rocket itself
- 3d printed Print the pusher (this can be reused several times!)
- 120mm steel, aluminum rod. Plastic might work. make sure it is completely smooth
- 500mm straight 6-8mm diameter wood stick
- Sugar-potassium nitrate fuel