1 / 2
Self centering sugar Rocket
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Fully functional sugar rocket.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 42
- Makes
- 0
- Views
- 409
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Share Alike
It is intended to be attached with tape to a 6-8mm diameter wood stick.
The advantage of this model is that it has a housing at the tip to add a smooth 8mm steel or aluminum rod in diameter and also includes a cylinder to press the sugar. This is how the finished rocket, with the hole already made perfectly concentric and straight for a stable flight.
It was tested several times.
Parts list
- 3d printed Rocket itself
- 3d printed Print the pusher (this can be reused several times!)
- 120mm steel, aluminum rod. Plastic might work. make sure it is completely smooth
- 500mm straight 6-8mm diameter wood stick
- Sugar-potassium nitrate fuel