Spice Rack Pullout printable on Mini+
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Essentially the space rack of SpongyBob, but modiefed so it's printable on Prusa Mini+
- Ocena
- 3 / 5
- Polubienia
- 35
- Pobrania
- 148
- Wydruki
- 1
- Wyświetlenia
- 1739
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
UPDATE 10.1.25: Under the download section is now a installation manual available.
UDATE 1.12.24: After the hint of @GabrioB_1701666, that the STL still don't match the STEP file, I generated all of them new out of the CAD and replaced all of them.
If you plan to download and print it, read the comment of GabrioB, who had issues with the clearance. I propose to print just segments of the different parts and check if they smoothly go in to each other.
UPDATE 2.9.23: For some reason I had uploaded old stl files of a version which has some issues. Now uploaded the correct version.
Sorry for those who already downloaded and printed the old ones.
Original release:
100% printed, so no additional hardware for mounting is needed, except the screws to acctually fix it in the shelf.
To print on Mini+ or any other printer with limited printspace of square 180 mm.
Mounted size is exactly as the original one.
As always with my uploads, 3D step file is included in download section.