1 / 2
Oppenheimer 3 Colour Filament Painting — zdjęcie 1
1 / 2

Oppenheimer 3 Colour Filament Painting

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Made with HueForge personal addition. Not for commercial use.

Ocena
0 / 5
Polubienia
5
Pobrania
20
Wydruki
0
Wyświetlenia
148
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 1.2
PLA BambuLab Basic Gray Transmission Distance: 2
PLA BambuLab Basic Jade White Transmission Distance: 4

Swap Instructions:
Start with Black
At layer #4 (0.44mm) swap to Gray
At layer #13 (1.16mm) swap to Jade White for the rest.
 

If it is too big, I'd recommend scaling only X and Y, keeping Z in order to preserve filament blending effect.

Tagi