1 / 2
Oppenheimer 3 Colour Filament Painting
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Made with HueForge personal addition. Not for commercial use.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 20
- Makes
- 0
- Views
- 148
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 1.2
PLA BambuLab Basic Gray Transmission Distance: 2
PLA BambuLab Basic Jade White Transmission Distance: 4
Swap Instructions:
Start with Black
At layer #4 (0.44mm) swap to Gray
At layer #13 (1.16mm) swap to Jade White for the rest.
If it is too big, I'd recommend scaling only X and Y, keeping Z in order to preserve filament blending effect.