1 / 3
Vertical Paper Towel Holder (Wall Mounted)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Vertical paper towel holder
- Ocena
- 4,75 / 5
- Polubienia
- 85
- Pobrania
- 873
- Wydruki
- 10
- Wyświetlenia
- 3068
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 10) (Komentarze: 16)Remiksy (0)Kolekcje (107)Powiązane
I designed a paper towel holder for a small nook in our bathroom. There are two Towel Rods with different diameters depending on the tolerance of your printer: one is 29mm and one is 30mm. The recess for the Rod in the Base is 31mm. I used epoxy to bond the two parts together. This will fit a jumbo 6 inch diameter roll.
September 19, 2024: Added a 30mm rod that accepts screws. I used M3 screws, but you could tap the holes for M4.
0.6mm nozzle, 0.3mm layer, PLA, Sovol SV01