1 / 3
Vertical Paper Towel Holder (Wall Mounted)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Vertical paper towel holder
- Rating
- 4.75 / 5
- Likes
- 85
- Downloads
- 873
- Makes
- 10
- Views
- 3,068
- Reviews
- 8
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I designed a paper towel holder for a small nook in our bathroom. There are two Towel Rods with different diameters depending on the tolerance of your printer: one is 29mm and one is 30mm. The recess for the Rod in the Base is 31mm. I used epoxy to bond the two parts together. This will fit a jumbo 6 inch diameter roll.
September 19, 2024: Added a 30mm rod that accepts screws. I used M3 screws, but you could tap the holes for M4.
0.6mm nozzle, 0.3mm layer, PLA, Sovol SV01