Nuka Cola Clock - Fan Art
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This silver bottle cap look this clock is sure to impress any fan of the game!
- Ocena
- 5 / 5
- Polubienia
- 66
- Pobrania
- 199
- Wydruki
- 4
- Wyświetlenia
- 767
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial
This fan art clock is great for any game room. With a silver bottle cap look this clock is sure to impress any fan of the game.
NO AMS REQURED! Just filament swap at the different layers to get the colors you want. There is a pre-colored AMS file also attached. Check out my full profile for more clocks and fun 3D Prints!
🖨 Printing Tips
This does require supports and I suggest using a .3 air gap for the underneath. The supports will stay on the print bed when you pull it off. I also set my supports .5 away from the model. Traditional supports with a wider pattern, I used a 8mm wide pattern which was a good balance and removed very easily. The goal is just to prevent major sagging when bridging the bottom layer. Use a fine .16 layer height for nice results.
🔗 Additional Information
You do need to purchase a clock movement, they run about $10 and can get one at any craft store or big box store. Amazon has a great selection. The one I used specifically for this one was https://amzn.to/47QD3q7. Amazon referral link I have no affiliation with the manufacturer.