1 / 8
How to make a keychain
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Have you ever wondered how to make a keychain? This guide is for you.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 87
- Wydruki
- 0
- Wyświetlenia
- 434
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (15)Powiązane
Have you ever wondered how to make a keychain? This guide is for you.
Requierements
- Fusion 360
- A browser
Steps
Browser
- Open this web https://danmarshall.github.io/google-font-to-svg-path/ and complete the font, text and size (units MUST be changed to mm) (55mm is a good size).
- Once done click on download SVG.
Fusion360
- Open Fusion360 and create a new sketch.
- Open instert tab, insert SVG.
- The name lines should appear green and light blue in the interior, if it isn't like that search for lines that aren't closed.
- Then use the offset tool, you may need to use it for every letter. (1-1.5mm is a good value)
- Press letter E (extrude) and select the letters, extrude them 5mm.
- then extrude again, this time select the offset section and extrude it 3mm
- If you want a hole create another sketch and add 2 circles 7mm and 4mm. Move them where you want it to be. Extrude again 3mm, make sure you are joining and not cutting.
- Press file (top left corner) and export.
Final result
Now you have your keychain!
If you have any doubts or inquiries reach me in the comments or send me a DM