1 / 8
How to make a keychain
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Have you ever wondered how to make a keychain? This guide is for you.
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 87
- Makes
- 0
- Views
- 434
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial
Have you ever wondered how to make a keychain? This guide is for you.
Requierements
- Fusion 360
- A browser
Steps
Browser
- Open this web https://danmarshall.github.io/google-font-to-svg-path/ and complete the font, text and size (units MUST be changed to mm) (55mm is a good size).
- Once done click on download SVG.
Fusion360
- Open Fusion360 and create a new sketch.
- Open instert tab, insert SVG.
- The name lines should appear green and light blue in the interior, if it isn't like that search for lines that aren't closed.
- Then use the offset tool, you may need to use it for every letter. (1-1.5mm is a good value)
- Press letter E (extrude) and select the letters, extrude them 5mm.
- then extrude again, this time select the offset section and extrude it 3mm
- If you want a hole create another sketch and add 2 circles 7mm and 4mm. Move them where you want it to be. Extrude again 3mm, make sure you are joining and not cutting.
- Press file (top left corner) and export.
Final result
Now you have your keychain!
If you have any doubts or inquiries reach me in the comments or send me a DM