Steam Deck Travel Case (Deckmate compatible)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Inspired by dbrands Killswitch front cover. Fits on a Steam Deck without cover, but with Deckmate attached.
- Ocena
- 5 / 5
- Polubienia
- 45
- Pobrania
- 186
- Wydruki
- 5
- Wyświetlenia
- 2381
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial
Inspired by dbrands Killswitch front cover.
This one fits on a Steam Deck without a cover, but is still compatible with the DeckMate
Print both halves standing to ensure proper strength of the clips.
assembled using:
2x M4x40 Unbraco Bolt
2x M4 Lock nut (Regular nuts can probably also be used)
1x Right Side
1x Left Side
2x Link
Assembly:
- Both sides are connected using the links.
- Bolts and nuts are mounted through the proper holes, to keep the sides secure.
- The case can now be put on the Steam Deck
Print Settings
Printer Brand:
Anycubic
Printer:
i3 Mega X
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.2
Infill:
20%
Filament: Spectrum PLA Black Post-Printing =============
Category: Video Games