Repair christmas tree stand "Baum Fix"
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
We have a christmas tree stand "Baum Fix aqua" (bought at Landi Switzerland) that uses 4 spring to maintain open the…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 243
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
We have a christmas tree stand "Baum Fix aqua" (bought at Landi Switzerland) that uses 4 spring to maintain open the pieces that grab the tree. All 4 springs supports are broken.
Without these pieces open, it is a pain to install the tree.
The printed parts must be installed on what remains of the springs supports. Just insert what remains of the support in the slot of the printed parts and place the spring on it. I used my fingers but I encourage you to use some fine pliers.
Designed in 5 min, not extremely refined but functional :)
updated with a stronger version
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
No
Resolution:
0.2 mm
Infill:
30%
Filament:
Unknown PLA
Notes:
Parts should be printed flat on the bed
Category: Replacement Parts