HSW Adjustable Countersink Size OpenSCAD ( Honeycomb Storage Wall )
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A remix that adds a feature to dynamically generate the size of the countersink nail + head size using OpenSCAD.
- Ocena
- 0 / 5
- Polubienia
- 30
- Pobrania
- 243
- Wydruki
- 2
- Wyświetlenia
- 1035
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Public Domain
This is a remix that lets you customize the nail and head size in the counter sink.
The code snippet here in the SCAD file demonstrates how:
~~~
// NEW ADDED TEST
// This structure will generate a single Custom Countersunk head
structure = [ [ [3, 1.0, 8.4]]];
//structure = [ [ [3, 1.0, 8.4]], [[3, 1.0, 8.4]]];
~~~
Here, you give the identifier of 3 just as a futureproof safety check in code. “1.0” represents a nail size of 1.0mm, and 8.4 represents a head size of 8.4mm
~~~
I tested this with 2 walls, 0.016 layer height, on a Bambu Labs P1S and it works perfect!
The best size for a thumbtack is 1.5mm nailsize and 9mm headsize. The thumbtack pushes in so perfectly and holdy very strong since theres no wiggle. My whole purpose for doing this is to be able to hang up a HSW in my apartment where I have limited access to full on nails!