Liczymy pasujące modele…
OpenSCAD customizable model for a first-in-first-out (FIFO) battery dispenser. Can be customized to dispense any cylindrical object. Currently there are models for AAA, AA and 18650 batteries to dispense 8, 12 and 6 batteries respectively…
About: Want to attach your existing gridfinity bins to your honeycomb storage wall (HSW) or just use the existing containers you already printed? This is just the right solution for you. Just download some HWS multiconnect connector ,…
Large Glue Stick holder for Honeycomb HWS Storage wall. The other ones I found were not quite big enough for the large size glue sticks. So close but not quite. Made a bigger one and omitted the honeycomb so it would print faster……
This remix allows the use of cable ties and velcro straps with the honeycomb storage wall. Two directions are provided for each, to allow horizontal an vertical placements Best printed in PETg (PLA will also work) does not need any…
Wall storage for a Meta Quest 3 compatible with the Honeycomb Wall Storage (HSW). Shoud be compatible with other headsets, but it is untested. Settings used: Layer Height = 0.20mm Walls = 6 Infill = 25% Support = On Orignal design Bengyboo
Tool Mount for Milwaukee M12 adapted for HWS Honeycomb Wall. Angled version and straight-up version
Milwaukee M12 battery holder to fit HWS Hex Wall
single paint pot holder for Tamiya 10ml paints
A way to display your rubber ducks on Honeycomb Wal
Petit panier Vonoroi pour mur de rangement en nid d'abeille (HWS)
a hex key holder for the honeycomb storage wall, so you can easily access your allen keys. it fits sizes 10, 8, 6, 5, 4, 3, 2.5, 2 and 1.5 print it upright and with supports, to support the mounting points.
This is a long hook that is twice the size of the original. I used two to mount a wire shelf to my HWS
Support pour une bouteille avec un diamètre inférieur a 8.5cm. On peut visualiser le niveau restant. Imprimé sur Bambulab P1S avec des couches de 0.2mm.
I needed a holder for my mouse that had a cord. I didn't like the cord sticking up in the air wanted it down.
I modified mathiasl's paper towel holder for the hex wall system to work better for vinyl rolls. This is a print-in-place model and no supports are needed. The 3mf file has both the right and left holders. The springs can be found on…
Small Vonoroi Basket for Honeycomb Storage Wall (HWS) 0.2mm layer, 2 walls, 15% infill
Check out Horacio's description: https://www.printables.com/model/535184-hsw-hook This hook was remixed from his “Super tight fit and stop wall” HWS-Wall-Hook-25.stl.
Hold X-acto knife set box (Plastic one not sure for the wood one).
Uses M4 screw and nut for attaching to the wall.
Thanks @tee_472634 for original model : https://www.printables.com/model/532327-honeycomb-storage-wall-spool-filament-holder The base of the spool holder is designed with upgraded attachments specifically for the honeycomb wall system,…
I was very surprised to see no one has yet designed a holder for these tube cutters to use on the Honeycomb Storage Wall so here it is. Print as you need it but it is recommended to use 5 wall thicknesses or more for maximum strength.
An angled rack for holding spice jars that attaches to standard HSW honeycomb. I built this to fit my Ender 3 S1 Pro (235x235 bed size (Thanks Thomas Toka for the firmware allowing use of the entire bed space!). The rack part fits…
Roughly 50mm long hook (49.xx) that sits in between the already provided short and long versions. Easy remix, nothing fancy. Shared just to save the trouble of loading the original model into CAD software. Cheers 🍻
I have created a model that fits for the Hultafors Talmeter. The M3 insert is used for mounting in the Honeycomb Storage Wall. I used a 10 mm M3 screw in addition to an M3 nut.
Popsicle Stick Mount with Lid (For HWS). The spacing in the front is to put a label tape of 9mm.
An attachment for the HSW system to hold a PTFE tube cutter Can fit into an empty insert from the system pretty neatly and requires no supports I printed mine at 0.28mm layer height with 3 walls for improved strength, but it's not 100%…
Simple Honeycomb Wall clamp to hold AA or Cr123 cell flashlights. Also works well for other round items like broom handles. Print in PETG or ABS with the recommended settings for your filament. PLA is NOT recommended as it will deform…
A simple yet effective holder for your Thwack Hammer. Comes in screw on and Honeycomb Wall patterns. Skadis wall to be added later. This robust and tighter fitting design means your hammer wont fall off the wall (unlike other patterns on…
A little honeycomb storage wall shelf for small items on your desk In the pictures I messes up the sizes and the honeycomb grid is upside down but the final version made for standard sizes…
Ratcheting crimping plier + spare jaw (IWISS SN) holder for honeycomb storage wall (HWS)
Flipper Zero Mount For HoneyComb Wall Storage
Before printing This design is mostly tested, but still a WIP. You still need a set of parts from original blasters: YEHW - Y12_Griddle YEHW - Y10_Rail_Max YEHW - Y16_Trigger Wildstyle - Ejector_buttonversion (other ejector types should…
I loved the original model but needed it for my Honeycomb Wall Storage. It prints with no support and can hold up to 10x darts. Thanks to @Avise for making this in the first place
Thanks, @Nunuz57 for the original model! I decided to remix this model for the honeycomb storage wall system for myself and others who may find it useful. Printing instruction : wall perimeter 3 infill 10% res as original part to HWS
A simple quickdraw / carabiner hanger for HSW system. Print settings layer height: 0.15 perimeters: 2 infill: 10% gyroid
This is a simple holder for DeWalt drill bits in their case for mounting on your Honeycomb Wall Storage system.
The bottom is full of M4 Holes in HWS pattern so You can mount it however you like.
Bottle holder for Honeycomb wall storage
Can holder from two tarts attacahble to HWS system. Dimmensions for 3DLAC spray (inner diameter 54mm) Printing instructions: Recommemed PETG (at least for upper part to make it flexible) 3 perimeter walls three support for hws inserts…
Remix of Jakub's part, just changed it to a hex-fit instead of screw mount.
Just a quick edit to make this perfectly made Led controller holder work with the Honeycomb wall system instead of skadis bring you infill up a bit to make a bit more sturdy maybe 35%-40%
Original on the right, vs. this model on the left with the velcro command strip
HoneyComb tootbrush for empty conector
Supporto per parete attrezzata Honeycomb Wall HWS per set Cacciaviti WIESEMANN Il supporto consente di trattenere sulla parete attrezzata Honeycomb HWS 4 cacciaviti. Dimensioni nelle immagini allegate. Viene assicurato alla parete…
Honeycomb Storage Wall Mount for practical Mantis Clamp Arm (Print-in-Place). Arm for download - 3 Sys Arm - 0pt25 spacing Usable for phone, soldering pieces, light, etc.
Made for my ‘Diller’ 300ml drinks bottle with flip lock lid, flip the latch, pop the top and drink. I recommend it. https://amzn.to/3LZYdcb My drink is now in easy reach on the HWS to the left of my desk - and no chance of me knocking it…
Supporto per parete attrezzata Honeycomb Wall HWS per Kit Deburring Tool. Il supporto consente di trattenere, sulla parete attrezzata Honeycomb HWS, lo strumento e la scatolina con gli inserti. Questo supporto consente di minimizzare lo…
Supporto Martello per Cacciaspine per parete attrezzata HWS Honeywall. Consente di sostenere un Martello per cacciaspine con diametro testa di 25mm
Support for 9 3/4 sign compatible to HWS
Mainly for m3 screw but if anyone wants I will add m4, m5 version. Secure the position of m3 hex nut always. You can easily unscrew and screw m3 screw, increasing the reusability. Easily insert and pull out. Minimize usage of filament.
This is a dispenser for 9 V block batteries.
There are 2 models 1 that is a bit stouter for larger tools, and one that is angled. This is because tools can be knocked out of the holder if brushed while hanging. The angle requires that the tool is “lifted” out.
I found the holes in the original wouldn't accept files with handles
PLA Without supports. Dimension inside 85mm x 15mm x 50mm.
Neither of the 2 original nut designs for robkar's spool holder would work with the very reasonably-priced Hatchbox 1kg filament spools or 0.5kg 3D Solutech spools due to their small spool hole size. In fact, the smallest size supported…
Im not the best designer but it works so not as pretty as others. Feel free to remix and improve. Does what it says on the tin. Printed in bambulab orange pla basic with default settings on the X1C no supports needed.
HWS small, 3 ruler hook insert m3 length 6, outer diameter 4.2 m3 screw
Designed to suit the HSW system - Hangar mount to suit the Harder & Steenbeck Infinity Solo Airbrush. Likely to also fit most other variants too,
Honeycomb Wall Storage 8BitDo SN30PRO Controller Holder
Basta con 2 capas y 10% de relleno en PETG.
Seems like all the parts to mount to the wall uses the countersunk screws. All the wall anchors that I find have flat bottoms to them. I quickly slapped this together because I couldn't find a stl that is like it.
For those that printed the Bambu Film Sticking Fixture for applying replacement film to the printer's build plate. I remixed Wall mount for Bambu Film Sticking Fixture Tool by Schmoaler to go along with the Honeycomb Storage Wall There…
a holder for ikeas shortcut button
This 5-spool filament holder is designed specifically for MMU (Multi Material Unit) systems and the Honeycomb storage wall. Keep your filaments organized and easily accessible. This first version is ideal for those looking to optimize…
8-Piece Mini Hook & Pick Set Holder – Honeycomb Storage Wall Keep your 3D printing tools organised and close at hand with this 8-Piece Mini Hook & Pick Set Holder , designed specifically for the Honeycomb Storage Wall (HSW) . I designed…
Wanted a holder for the Bottle for cleaner, adhesive for stickiness and for the glue. Fits to the HWS ! one Double M4 holds it perfectly. Sinking for M4 screw included. Also comes with a hook for a cloth. 95% of openscad code is chatgpt :)
9-Volt (9V) wall battery magazine with dispencer lever for the Honeycomb Wall system. This is a remix of design done @Zerg. I thought it would be a cool to have on my HWS.
I loved the original model, but wanted to be able to hold more nozzles, so I added a second row. Now it holds 10 instead of 5 nozzles in the same HWS footprint. Recommended settings: 0.4 Nozzle, 3 Perimeters, 5/4 bottom/top solid layers.…
Different tools mean different requirements, therefore i made my own tool holder for HWS in Autodesk Fusion 360. Could be improved, but works for me. 2 Part, which have to be glued together (i don't want to print supports all around). For…
Holds LED Magnifyer glasses on HWS. Also holds most large sun glasses.
I saw something similar here, but with a smaller diameter of holes, so I made my own version for thicker file handles.
Pliers Holder for HWS A simple and practical 3D-printed pliers holder designed to keep your tools neatly organised and easily accessible. This holder has been specifically designed to fit the Sealey / Siegen Comfort Grip Pliers Set 3pc –…
Angle Finder Holder for HWS/HSW Keep your workspace organised and your measuring tools close at hand with this Angle Finder Holder , designed specifically for the Honeycomb Wall Storage (HWS/HSW) system . I designed this holder to provide…
Klein KNECT Modbox Mount for Honeycomb Wall Storage (HWS), created by RostaP https://www.printables.com/model/152592-honeycomb-stora
0.6mm lower top catch bit, if u have issues with ur catch not rotating far enuff ig, i printed 2 walls 100% infill :)
