Zip Tie Corner Mounting Bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Helps mount things to square posts with zip ties so the zip ties don't have to make a 90 degree corner when tightening.
- Ocena
- 5 / 5
- Polubienia
- 20
- Pobrania
- 40
- Wydruki
- 1
- Wyświetlenia
- 367
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This simple print helps you mount stuff to square poles using zip ties.
When I tried mounting a bird house to a square post using zip ties, it was difficult to get the zip ties tight enough because the zip ties don't want to make a 90 degree angle. This print allows the zip ties to get tight because they only have to make a half inch radius. Additionally, this print helps prevent zip ties from marring the post.
Print four for mounting to poles. They are sized for standard zip ties.
There are two models, one that is symmetrical, and one that allows for the zip tie to be closer (or further) from the post depending on which may you mount them. Enjoy!