Piper Rudder Pedal for Saitek
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This pedal assembly has a similar look and feel to the real deal for Saitek system.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 50
- Wydruki
- 0
- Wyświetlenia
- 718
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This pedal has a similar look and feel to the real deal, but was modified to fit over the standard pedals that come with the Saitek system. Simply remove the toe pedals on your Saitek assembly by pressing the center button. Unscrew the mounting rails on the back of the removed pieces. Screw the same rails into the PA-28 pedal — taking care not to over tighten (and strip out the screw).
This is a long print and requires supports. I went to 60% infill using PLA since you are putting some pressure on it with your feet. Stronger material and less infill would work as well.