1 / 1
Scooter or Bike SmartPhone holder | handlebar support — zdjęcie 1

Scooter or Bike SmartPhone holder | handlebar support

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is an universal scooter or phone holder for a handlerbar.

Ocena
5 / 5
Polubienia
44
Pobrania
296
Wydruki
2
Wyświetlenia
1690
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Gadgets
Licencja
Creative Commons — Attribution — Noncommercial

This model use M3 screws and M3 nuts with 6mm of diameter in order to assembly bottom jaw to the scooter or bike handlebar. The screw used in the main jaw is a M8 bolt using 1.25mm thread.

Enjoy it!

 

Changelog:

  • 2nd Sept 2023:
    • I've change the tolerances of the screw decreasing the holw thead and the screw thread -0.1mm respectively, so now should have a better adjustment once it's printed in your 3d printers.
  • 5th Sept 2023:
    • I've change the wholes of both cilinders from phone holder piece as they were conical insted of cylindrical.
    • I've also modified the phone holder piece in order to do it easier to print without supports, so the piece can be fully printed without them as there is one face with full contact with the 3d printer bed.
    • New phone holder file uploaded with the changes
    • Screw file uploaded checking again tolerances.
    • Step file uploaded with all the updated.
       

Tagi