Bose Companion 3 Satellite Stands
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bose Companion 3 Satellite stands. Created with low profile so the speakers could be fitted in a small / low place.
- Ocena
- 5 / 5
- Polubienia
- 17
- Pobrania
- 151
- Wydruki
- 2
- Wyświetlenia
- 1824
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution
Bose Companion 3 Satellite stands. Created with low profile so the speakers could be fitted in a small / low place.
Please leave a like and show a "Make" if you printed this model, thank you.
Print instructions
Category: Audio Summary
Bose Companion 3 Satellite stands. Created with low profile so the speakers could be fitted in a small / low place.
Please leave a like and show a "Make" if you printed this model, thank you.
Print Settings
Printer Brand:
Anycubic
Printer:
All-metal Mega
</div>Rafts:No
Supports:
Yes
</div>Resolution:0.2
Infill:
25%
</div>Filament:
Not important PLA Black
Notes:
To reduce material and at the same time have strength in the model I setup the model in Cura slicer with three different infill percentages:
Base: 20%
Vertical: 50%
Topmount: 100%
Use the support blocker functionality within Cura to set different infill values on different places on your model.