Wall Mount for Black and Decker Hedge Trimmer. May fit others.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I modeled this to tidy up the garage and get my hedge trimmers up off of floor.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 76
- Wydruki
- 1
- Wyświetlenia
- 543
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
I designed this for my B&D 120v corded hedge trimmers, though it can probably be used for alot of things. It has two vertically positioned screw holes, so it can be mounted to a wall stud using two #9 pan head wood screws.
I printed mine @ 25% infill.
The 3d model has an integral support, so you won't have to generate supports yourself. The support is set with a .2mm gap between the support and the overhang. Your printer will need to be properly calibrated for this to work.
It also has a layer that requires 1" bridging, so you may need the cooling fan activated for that layer, at least.