Wall Mount for Black and Decker Hedge Trimmer. May fit others.
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I modeled this to tidy up the garage and get my hedge trimmers up off of floor.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 76
- Makes
- 1
- Views
- 542
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
I designed this for my B&D 120v corded hedge trimmers, though it can probably be used for alot of things. It has two vertically positioned screw holes, so it can be mounted to a wall stud using two #9 pan head wood screws.
I printed mine @ 25% infill.
The 3d model has an integral support, so you won't have to generate supports yourself. The support is set with a .2mm gap between the support and the overhang. Your printer will need to be properly calibrated for this to work.
It also has a layer that requires 1" bridging, so you may need the cooling fan activated for that layer, at least.