JeSc Fan Deflector Redirector 40mm v1.0
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I made this because the fan of my part-cooling made a lot of backdraft that cooled the part on the bed when it moved…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 249
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
I made this because the fan of my part-cooling made a lot of backdraft that cooled the part on the bed when it moved across the bed. Large prints would release from the bed because of this draft. This 40mm fan deflector redirects the draft upward, away from the bed.
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/ljw958W1pk3
Print instructions
Unassociated tags: fan def, fan redirector
Category: 3D Printer Parts Summary
I made this because the fan of my part-cooling made a lot of backdraft that cooled the part on the bed when it moved across the bed. Large prints would release from the bed because of this draft. This 40mm fan deflector redirects the draft upward, away from the bed.
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/ljw958W1pk3
Print Settings
Printer:
Tevo Tarantula
Rafts:
Doesn't Matter
</div>Supports:No
Resolution:
0.16
</div>Infill:75%
Notes:
I used eSun PLA+ 90/212 temps