Pimoroni Inky Frame 5.7" Case (thicc ver.)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple enclosure for Inky Frame 5.7". Does not include the wall mount nor accommodate the accessory kit.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 48
- Wydruki
- 0
- Wyświetlenia
- 520
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a simple mod to Ingurum's original case. Walls were made thicker and features moved to accommodate the print specs for a specific printing service.
Summary (Front/Back):
Walls are 0.8mm or thicker.
Cantilevers are 1mm or thicker.
Protrusions/details are 0.5mm or thicker.
Summary (Buttons):
All walls/protrusions are 1mm or thicker.
NOTE: The buttons were designed for printing in clear acrylic, intentionally covering the button LEDs to create a glow effect through the button. Printing the buttons in an opaque material will result in obscuring the LEDs.