Pimoroni Inky Frame 5.7" Case (thicc ver.)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple enclosure for Inky Frame 5.7". Does not include the wall mount nor accommodate the accessory kit.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 48
- Makes
- 0
- Views
- 520
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
This is a simple mod to Ingurum's original case. Walls were made thicker and features moved to accommodate the print specs for a specific printing service.
Summary (Front/Back):
Walls are 0.8mm or thicker.
Cantilevers are 1mm or thicker.
Protrusions/details are 0.5mm or thicker.
Summary (Buttons):
All walls/protrusions are 1mm or thicker.
NOTE: The buttons were designed for printing in clear acrylic, intentionally covering the button LEDs to create a glow effect through the button. Printing the buttons in an opaque material will result in obscuring the LEDs.