SV06 Cam Mount Short With Ball Swivel
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remixed from 3DprintMyLife's model. I wanted a lower mount with more adjust-ability. Also added a ball socket.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 307
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This is a shorter camera mount with a ball socket for more adjust-ability. I mounted my camera to the socket end with 2 sided tape that came with the camera.
Print the Cam_Mount_Short with the flat side down using supports touching the bed only. I printed the CamMountSocket at the same time with 15% infill. I printed the CamMountSocketNut and BallJointCamHolder separate without support at 50% infill.
My camera floats just over the far corner of the bed(Make sure you don't adjust it to interfere with the beds movement). It does not interfere with my printable space.
Used basic PLA to print.