Mandolarian Helmet for Prusa MK4/MK3S/MK3S+ COMPLETE WITH MK4 GCODE
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Created especially for MK4 to maximize helmet size. Fits most (but not all) heads
- Ocena
- 5 / 5
- Polubienia
- 75
- Pobrania
- 655
- Wydruki
- 3
- Wyświetlenia
- 4244
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Cosplay & Costumes in general
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Please leave a “like” is appropriate, THX
NOW WITH MK4 GCODE!!!
Print the Face Mask and Crown separately, as are the back grill, top and bottom ear pieces.
The facemask takes 34+ hours with MK3S/+ Nozzle 0.4
The Crown takes about the same, but does not need any supports
23+ with hours with 0.6
But only 15+ with MK4 with input shaper and pressure advance (Firmware 5.0.0 RC1)
If not using MK4, be sure to to set brim (skirt) to 0 with no brim.
Support needs to be Snug (Organic extends to far to edges)
Printed in PLA (Sunlu Silk at 185/183 nozzle to minimize stringing) with 66 Bed with glue.
Attached the lower ears flaps first (to Face Mask) as the top overlaps the bottom.
Made a templet for the window tint (eyes & Mouth) and attached to mask BEFORE joining the Mask & Crown.
Used a fast setting adhesive to join the two halves.
Had min post production cleanup, mainly used fingernails to scrap imperfections.
Attached the upper before gluing the Face Mask & Crown together (the ears help with the alignment.