1 / 4
Mandolarian Helmet for Prusa MK4/MK3S/MK3S+ COMPLETE WITH MK4 GCODE — image 1
1 / 4

Mandolarian Helmet for Prusa MK4/MK3S/MK3S+ COMPLETE WITH MK4 GCODE

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Created especially for MK4 to maximize helmet size. Fits most (but not all) heads

Rating
5 / 5
Likes
75
Downloads
655
Makes
3
Views
4,244
Reviews
2

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — NoDerivatives

Please leave a “like” is appropriate, THX

 

NOW WITH MK4 GCODE!!!

Print the Face Mask and Crown separately, as are the back grill, top and bottom ear pieces.

The facemask takes 34+ hours with MK3S/+  Nozzle 0.4

The Crown takes about the same, but does not need any supports

23+ with hours with 0.6

But only 15+ with MK4 with input shaper and pressure advance (Firmware 5.0.0 RC1)

If not using MK4, be sure to to set brim (skirt) to 0 with no brim.

Support needs to be Snug (Organic extends to far to edges)

Printed in PLA (Sunlu Silk at 185/183 nozzle to minimize stringing) with 66 Bed with glue.

Attached the lower ears flaps first (to Face Mask) as the top overlaps the bottom.

Made a templet for the window tint (eyes & Mouth) and attached to mask BEFORE joining the Mask & Crown.

Used a fast setting adhesive to join the two halves.

Had min post production cleanup, mainly used fingernails to scrap imperfections.

Attached the upper before gluing the Face Mask & Crown together (the ears help with the alignment.