THE FROG 3INCH DRONE FRAME
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is my first drone frame design and I'm happy to share it with you !
- Ocena
- 0 / 5
- Polubienia
- 24
- Pobrania
- 160
- Wydruki
- 1
- Wyświetlenia
- 1503
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
This is my first frame design. When I designed it my goals were :
- The quietest in flight
- The lowest vibration
- Compatible with DJI Vista (because that what I use on all my drones)
I achieved the low noice by making it the lightest possible combine with what would be consider low KV motors. I use 1404 2900KV motors on 4s for 3inch props.
The spec of the frame :
- 2.5mm single bottom plate (for the weight)
- 1.5mm Top plate with 20x20 mounting hole for a Vista air unit
- 140mm Wheel base
- 20x20 and 25.5x25.5 monting holes
- TPU camera mount only
- Micro size camera compatible
- DJI O3 not compatible
- 9mm and 12mm motors hole spacing (3x M2)
- 2 stand-off M2x25
- 1 stand-off M3x25
- Weight < 27g (with stack screw and TPU)
I forgot to weight the frame naked. I'll add it later ;-)
You can see my builds here :
https://forum.wearefpv.fr/topic/21460-the-frog-3inch-v2/
https://rotorbuilds.com/build/31519
https://rotorbuilds.com/build/31017
20SEP2023 - Update for 12x12mm mounting motors holes