Focus Gauge for Epilog Laser Cutter with 4" Lens
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An alternative focus gauge for the Epilog Helix laser cutter. Should fit other models (Mini, Helix, Legend).
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 463
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
I recently needed to cut some thick polyurethane foam with my Epilog Helix laser cutter.
I purchased an inexpensive 4" focal length lens to increase the working distance and depth of cut. The stock focus gauge only works with the original 2" lens, so I designed an alternative focus gauge for the 4" lens.
I designed this 4" focus gauge to mimic the original Epilog focus gauge. Two 2-56 hex nuts are pressed into the gauge so that it will stick to the existing magnets in the Epilog carriage.
There is a simple ruler printed on the gauge that helps you to put the focal plane at the center of thick materials. I have found that this works much better than focusing at the top of the material.