1 / 6
Focus Gauge for Epilog Laser Cutter with 4" Lens — image 1
1 / 6

Focus Gauge for Epilog Laser Cutter with 4" Lens

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

An alternative focus gauge for the Epilog Helix laser cutter. Should fit other models (Mini, Helix, Legend).

Rating
0 / 5
Likes
4
Downloads
41
Makes
0
Views
463
Reviews
0

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Share Alike

I recently needed to cut some thick polyurethane foam with my Epilog Helix laser cutter. 

I purchased an inexpensive 4" focal length lens to increase the working distance and depth of cut. The stock focus gauge only works with the original 2" lens, so I designed an alternative focus gauge for the 4" lens.

I designed this 4" focus gauge to mimic the original Epilog focus gauge. Two 2-56 hex nuts are pressed into the gauge so that it will stick to the existing magnets in the Epilog carriage.

There is a simple ruler printed on the gauge that helps you to put the focal plane at the center of thick materials. I have found that this works much better than focusing at the top of the material.

 

Tags