Screen Door Closer Bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bracket for a pneumatic screen door closer.
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 78
- Wydruki
- 4
- Wyświetlenia
- 395
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a bracket for a pneumatic screen door closer. It will likely replace many brands/models. I've attached step and fusion 360 files to make it easy to modify.
I modeled this to match the original (broken) bracket on my door closer as shown here:
You may be able to rotate the part 60 degrees onto the rear face (as shown) and print without supports, but it's a relatively small contact area so you may want a brim if you struggle with bed adhesion.
I printed mine in PETG with a 0.4mm nozzle and 0.2 mm layer heights. I don't think the tolerances are very tight for most door closers so just use whatever makes you happy.