Inland cardboard spool ring
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Got tired of the drag in my sunlu dryer of the cardboard. Made a solution. uses magnets to stay together!
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 53
- Wydruki
- 0
- Wyświetlenia
- 645
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
Printing a lot of TPU and got frustrated with the weaker motor on one of my printers. Made these rings to help it roll better in my SunLu dryer. It takes 2 prints to make a set for a spool. Should not require any supports. If using it in a dryer I recomend printing it out of whatever material you are trying to print so that it can handle the heat.
Uses 3/8'' x 1/8'' magnets x4 per side. Could use 2 per side really.
N52 Neodymium Magnets 3/8 in x 1/8 in Rare Earth Disk - Applied Magnets - Magnet4less
Link for mags but use what you want!
I can make mods to this whenever so if there is something you may want to see let me know.