1 / 9
Trilogía "Asesino de brujas" - "Serpent & Dove" - Hueforge — zdjęcie 1
1 / 9

Trilogía "Asesino de brujas" - "Serpent & Dove" - Hueforge

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Portadas de los libros de la trilogía “Asesino de brujas” de Shelby Mahurin (‘Serpent & Dove’) realizada con Hueforge.

Ocena
0 / 5
Polubienia
7
Pobrania
97
Wydruki
0
Wyświetlenia
832
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Portadas de los libros de la trilogía “Asesino de brujas” de Shelby Mahurin (‘Serpent & Dove’). Las imágenes están sacadas de internet y pasadas por HueForge. 

Para los fans y seguidores de la serie, entre los que se encuentra mi querida hija ;-)

Las marcas de los filamentos usadas en el modelo impreso no son las especificadas en las intrucciones de Hueforge, ya que uso otras diferentes, aunque los colores son similares. 

Altura 220 mm. Ancho 139,29 mm.

El libro 1 está pintado para que se pareciese más a la portada original. Imprimí antes de preguntar, fallo mío. 

----------

Covers of the books of the “Witchkiller” trilogy by Shelby Mahurin (‘Serpent & Dove’). The images are taken from the internet and passed through HueForge.

For the fans and followers of the series, among which is my dear daughter ;-)

The filament brands used in the printed model are not those specified in the Hueforge instructions, since I use different ones, although the colors are similar.

Height 220mm. Width 139.29 mm.

Book 1 is painted to look more like the original cover. I printed before asking, my bad.

----------

LIBRO 1: LA BRUJA BLANCA.

 

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Tough Lavender Blue Transmission Distance: 2
PLA BambuLab Basic Red Transmission Distance: 5
PLA BambuLab Basic Jade White Transmission Distance: 4

Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to Lavender Blue
At layer #10 (0.88mm) swap to Red
At layer #16 (1.36mm) swap to Jade White for the rest.

----------

LIBRO 2: LOS HIJOS DEL REY.

 

 

 

 

 

 

 

 

 

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Red Transmission Distance: 5
PLA BambuLab Basic Yellow Transmission Distance: 6
PETG JAYO White Transmission Distance: 6

Swap Instructions:
Start with Black
At layer #5 (0.48mm) swap to Red
At layer #12 (1.04mm) swap to Yellow
At layer #16 (1.36mm) swap to White for the rest.

----------

LIBRO 3: DIOSES Y MONSTRUOS.

 

 

 

 

 

 

 

 

 

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA BambuLab Tough Black Transmission Distance: 0.6
PLA BambuLab Basic Red Transmission Distance: 5
PLA PolyTerra Sapphire Blue Transmission Distance: 0.3
PLA PolyLite Pro White Transmission Distance: 5

Swap Instructions:
Start with Black
At layer #5 (0.48mm) swap to Red
At layer #8 (0.72mm) swap to Sapphire Blue
At layer #10 (0.88mm) swap to White for the rest.

Tagi