Devil Horns for Logitech Headset
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A set of devil horns for your Logitech G432 headset and similar models.
- Ocena
- 5 / 5
- Polubienia
- 47
- Pobrania
- 264
- Wydruki
- 1
- Wyświetlenia
- 1202
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Cosplay & Costumes in general
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Continuing my saga of add-ons for the Logitech G432 headset, I've designed these goofy demon horns. They are a pretty easy, simple and quick print.
Based on reviews of the previous model (which you can check out here: Cat Ears for Logitech Headset), it looks like the dimensions are pretty universal for other Logitech and non-Logitech branded headsets.
However, here are the critical dimensions of the model:
The model has a 10 x 2 mm hole for it to be attached to the headset via some straps. The 10º angle is for the correct fitting in the middel part of the headset.
For a complete set, you will need to print two of them, these being an identical of one another.
Since you may want to modify the model, apart from the .STL I also included the SOLIDWORKS 2020 files.
Print Settings
Printed in PLA, without supports or rafts, at 0.2 mm resolution and 20% infill.
Printing the parts is fairly straightforward, no need for supports or rafts.
To get a uniform look, I would suggest flipping one of the models when preparing the print. This way you will get a more consistent look because the two horns have the same surface finish in a symmetrical way.
Assembly
Once the horns were printed, to attach them to the headphones, I used some Velcro strips I had lying around, so I suppose that you can use cable ties or something similar.
The assembly detail can be seen in the following picture:
