Utility Blade Scraper
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remixed Mikek scraper for utility blades. Updated to use M3 flat head screws and heat-set nuts.
- Ocena
- 5 / 5
- Polubienia
- 29
- Pobrania
- 179
- Wydruki
- 2
- Wyświetlenia
- 1069
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
The original design by Mikek is great, but I don't have much of a selection of M3 cap-head screws. I do have a great selection of M3 flat-head screws! Also, my experience with pressed-in M3 nuts is not great. Heat-set nuts wont fall out, and they have more than double the grip-length.
I modified the original design for use with the M3 3-mm X 5-mm heat-set nut. You will need two. You will also need two M3X8-mm flat head screws. Phillips head screws are shown, but you can class it up with a hex or Torx screw!
Printed version shown was printed in Sunlu ASA at 0.2-mm layer height and 70% fill.
Material, layer height and fill percentage are flexible.