Utility Blade Scraper
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remixed Mikek scraper for utility blades. Updated to use M3 flat head screws and heat-set nuts.
- Rating
- 5 / 5
- Likes
- 29
- Downloads
- 179
- Makes
- 2
- Views
- 1,069
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
The original design by Mikek is great, but I don't have much of a selection of M3 cap-head screws. I do have a great selection of M3 flat-head screws! Also, my experience with pressed-in M3 nuts is not great. Heat-set nuts wont fall out, and they have more than double the grip-length.
I modified the original design for use with the M3 3-mm X 5-mm heat-set nut. You will need two. You will also need two M3X8-mm flat head screws. Phillips head screws are shown, but you can class it up with a hex or Torx screw!
Printed version shown was printed in Sunlu ASA at 0.2-mm layer height and 70% fill.
Material, layer height and fill percentage are flexible.