Cyma CM127 Magazine Holder + Belt Clip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple solution to carry Cymas aep magazines on your belt or wherever you want.
- Ocena
- 4 / 5
- Polubienia
- 13
- Pobrania
- 72
- Wydruki
- 1
- Wyświetlenia
- 622
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The “Cyma_CM127_Magazine_Holder” can be screwed to anything with M3 threads and 10mm spacing. For example to the included “Cyma_CM127_Magazine_Holder_Belt_Clip” or my “Cyma CM 127 Carbine Conversion/ Rony”.
The magazines will be retained by a clip and therefore need a firm tug to be released. You can use the holder upside down without a problem. Since the clip fixates the magazines in all directions, they wont rattle in the holder.
The Magazine Holder works withe the 29rd, 36rd and 90rd magazine.
To screw the magazine holder on, you need M3 countersunk screws.
The belt clip works best with at least 4mm thick belts and won't slide from side to side on them. The belt can be up to 40mm wide.
You need two M3 thread inserts (e.g. ruthex “RX-M3x5.7”) for the belt clip.
Print both parts with 4mm wall thickness for best results.