1 / 3
Cyma CM127 Magazine Holder + Belt Clip — image 1
1 / 3

Cyma CM127 Magazine Holder + Belt Clip

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Simple solution to carry Cymas aep magazines on your belt or wherever you want.

Rating
4 / 5
Likes
13
Downloads
72
Makes
1
Views
622
Reviews
1

Updated at source:

Model information

Category
Other Sports
License
Creative Commons — Attribution — Noncommercial — Share Alike

The “Cyma_CM127_Magazine_Holder” can be screwed to anything with M3 threads and 10mm spacing. For example to the included “Cyma_CM127_Magazine_Holder_Belt_Clip” or my “Cyma CM 127 Carbine Conversion/ Rony”.
The magazines will be retained by a clip and therefore need a firm tug to be released. You can use the holder upside down without a problem. Since the clip fixates the magazines in all directions, they wont rattle in the holder.
The Magazine Holder works withe the 29rd, 36rd and 90rd magazine.

To screw the magazine holder on, you need M3 countersunk screws.

The belt clip works best with at least 4mm thick belts and won't slide from side to side on them. The belt can be up to 40mm wide.
You need two M3 thread inserts (e.g. ruthex “RX-M3x5.7”) for the belt clip.

Print both parts with 4mm wall thickness for best results.

Tags