VKB Gunfighter III and Gladiator-K adapter for J-PEIN desk mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I was after a cleaner look mounting the VKB joysticks to the J-PEIN mounts. Custom mounting options for the VKB…
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 81
- Wydruki
- 0
- Wyświetlenia
- 601
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
I was after a cleaner look mounting the VKB joysticks to the J-PEIN mounts.
Custom mounting options for the VKB Gunfighter III and VKB Gladiator-K with the J-PEIN Desk Mount. The Gladiator-K mount is offset and pushes the base back by 30 mm to avoid interference vertical part of the mount.
The bases will attach to the J-PEIN mount with the supplied M6 screws. These are hard to get started, I used an impact driver to get them started.
The gunfighter uses 4 x M4 screws 12-15mm
The black box use 4 x M3 screws 10 mm the insert for the extrusion profile is a tight fit so it won't slide. It takes a little persuasion to get it where you want it.
I printed the black box mount vertically with supports for the screw holes everything else is flat with no supports.
The Gladiator-K uses 4x M4 screws 10-12 mm.
Use the screws to cut the threads before assembling.
Print Settings
Printer Brand:
Creality
Printer:
Ender 5
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
20%
Filament: Overture PETG Black
Category: Hobby