VKB Gunfighter III and Gladiator-K adapter for J-PEIN desk mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I was after a cleaner look mounting the VKB joysticks to the J-PEIN mounts. Custom mounting options for the VKB…
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 81
- Makes
- 0
- Views
- 601
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
I was after a cleaner look mounting the VKB joysticks to the J-PEIN mounts.
Custom mounting options for the VKB Gunfighter III and VKB Gladiator-K with the J-PEIN Desk Mount. The Gladiator-K mount is offset and pushes the base back by 30 mm to avoid interference vertical part of the mount.
The bases will attach to the J-PEIN mount with the supplied M6 screws. These are hard to get started, I used an impact driver to get them started.
The gunfighter uses 4 x M4 screws 12-15mm
The black box use 4 x M3 screws 10 mm the insert for the extrusion profile is a tight fit so it won't slide. It takes a little persuasion to get it where you want it.
I printed the black box mount vertically with supports for the screw holes everything else is flat with no supports.
The Gladiator-K uses 4x M4 screws 10-12 mm.
Use the screws to cut the threads before assembling.
Print Settings
Printer Brand:
Creality
Printer:
Ender 5
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
20%
Filament: Overture PETG Black
Category: Hobby